FAQ

Why Am I Getting Errors While Connecting to MongoDB?

If you have trouble connecting to a MongoDB deployment, see the Connection Troubleshooting Guide for possible solutions.

How Does Connection Pooling Work in the Node Driver?

Every MongoClient instance has a built-in connection pool for each server in your MongoDB topology. Connection pools open sockets on demand to support concurrent requests to MongoDB in your application.

The maximum size of each connection pool is set by the maxPoolSize option, which defaults to 100. If the number of in-use connections to a server reaches the value of maxPoolSize, the next request to that server will wait until a connection becomes available.

In addition to the sockets needed to support your application's requests, each MongoClient instance opens two more sockets per server in your MongoDB topology for monitoring the server's state. For example, a client connected to a three-node replica set opens six monitoring sockets. If the application uses the default setting for maxPoolSize and only queries the primary (default) node, then there can be at most 106 total connections in the connection pool. If the application uses a read preference to query the secondary nodes, those connection pools grow and there can be 306 total connections.

To support high numbers of concurrent MongoDB requests within one process, you can increase maxPoolSize.

Connection pools are rate-limited. The maxConnecting option determines the number of connections that the pool can create in parallel at any time. For example, if the value of maxConnecting is 2, the third request that attempts to concurrently check out a connection succeeds only when one the following cases occurs:

• The connection pool finishes creating a connection and there are fewer than maxPoolSize connections in the pool.

• An existing connection is checked back into the pool.

• The driver's ability to reuse existing connections improves due to rate-limits on connection creation.

You can set the minimum number of concurrent connections to each server with the minPoolSize option, which defaults to 0. The driver initializes the connection pool with this number of sockets. If sockets are closed, causing the total number of sockets (both in use and idle) to drop below the minimum, more sockets are opened until the minimum is reached.

You can set the maximum number of milliseconds that a connection can remain idle in the pool by setting the maxIdleTimeMS option. Once a connection has been idle for maxIdleTimeMS, the connection pool removes and replaces it. This option defaults to 0 (no limit).

The following default configuration for a MongoClient works for most applications:

const client = new MongoClient("<connection string>");

MongoClient supports multiple concurrent requests. For each process, create a client and reuse it for all operations in a process. This practice is more efficient than creating a client for each request.

The driver does not limit the number of requests that can wait for sockets to become available, and it is the application's responsibility to limit the size of its pool to bound queuing during a load spike. Requests wait for the amount of time specified in the waitQueueTimeoutMS option, which defaults to 0 (no limit).

A request that waits more than the length of time defined by waitQueueTimeoutMS for a socket raises a connection error. Use this option if it is more important to bound the duration of operations during a load spike than it is to complete every operation.

When MongoClient.close() is called by any request, the driver closes all idle sockets and closes all sockets that are in use as they are returned to the pool. Calling MongoClient.close() closes only inactive sockets, so you cannot interrupt or terminate any ongoing operations by using this method. The driver closes these sockets only when the process completes.

What Is the Difference Between "connectTimeoutMS", "socketTimeoutMS" and "maxTimeMS"?

To specify the optional settings for your MongoClient, declare one or more available settings in the options object of the constructor as follows:

const client = new MongoClient(uri, {
  connectTimeoutMS: <integer value>,
  socketTimeoutMS: <integer value>
});

To see all the available settings, see the MongoClientOptions API Documentation.

To specify maxTimeMS, chain the maxTimeMS() method with a timeout specification to an operation that returns a Cursor:

const cursor = myColl.find({}).maxTimeMS(50);

What Happens to Running Operations if the Client Disconnects?

Starting in MongoDB Server version 4.2, the server terminates running operations such as aggregations and find operations if the client disconnects. To see a full list of operations affected by this behavior, see the Server version 4.2 release notes in the Server manual.

Other operations, such as write operations, continue to run on the MongoDB Server even if the client disconnects. This behavior can cause data inconsistencies if your application retries the operation after the client disconnects.

How Can I Confirm That the Driver Closed Unusable Sockets?

If you experience unexpected network behavior or if a MongoDB process fails with an error, you may not receive confirmation that the driver correctly closed the corresponding socket.

To make sure that the driver correctly closes the socket in these cases, set the socketTimeoutMS option. When a MongoDB process times out, the driver will close the socket. We recommend that you select a value for socketTimeoutMS that is two to three times longer than the expected duration of the slowest operation that your application executes.

How Can I Prevent Sockets From Timing Out Before They Become Active?

Having a large connection pool does not always reduce reconnection requests. Consider the following example:

An application has a connection pool size of 5 sockets and has the socketTimeoutMS option set to 5000 milliseconds. Operations occur, on average, every 3000 milliseconds, and reconnection requests are frequent. Each socket times out after 5000 milliseconds, which means that all sockets must do something during those 5000 milliseconds to avoid closing.

One message every 3000 milliseconds is not enough to keep the sockets active, so several of the sockets will time out after 5000 milliseconds. To avoid excessive socket timeouts, reduce the number of connections that the driver can maintain in the connection pool by specifying the maxPoolSize option.

To specify the optional maxPoolSize setting for your MongoClient, declare it in the options object of the constructor as follows:

const client = new MongoClient(uri, {
  maxPoolSize: <integer value>,
});

What Does a Value of "0" Mean for "connectTimeoutMS" and "socketTimeoutMS"?

If you set the value of connectTimeoutMS or socketTimeoutMS to 0, your application will use the operating system's default socket timeout value.

How Can I Prevent Long-Running Operations From Slowing Down the Server?

You can prevent long-running operations from slowing down the server by specifying a timeout value. You can chain the maxTimeMS() method to an operation that returns a Cursor to set a timeout on a specific action.

The following example shows how you can chain the maxTimeMS() method to an operation that returns a Cursor:

// Execute a find command
await collection
  .find({ $where: "sleep(100) || true" })
  .maxTimeMS(50);

What Does the keepAlive Option Do?

The keepAlive connection option specifies whether to enable Transmission Control Protocol (TCP) keepalives on a TCP socket. If you enable keepalives, the driver checks whether the connection is active by sending periodic pings to your MongoDB deployment. This functionality only works if your operating system supports the SO_KEEPALIVE socket option.

The keepAliveInitialDelay option specifies the number of milliseconds that the driver waits before initiating a keepalive.

The 5.3 driver version release deprecated these options. Starting in version 6.0 of the driver, the keepAlive option is permanently set to true, and the keepAliveInitialDelay is set to 300000 milliseconds (300 seconds).

What Can I Do If I'm Experiencing Unexpected Network Behavior?

You might experience unexpected network behavior if the firewall between your application and MongoDB is misconfigured. These firewalls can be overly aggressive in their removal of connections, which can lead to unexpected errors.

Confirm that your firewall exhibits the following behavior:

• The firewall sends a FIN packet when closing a connection, informing the driver that the socket is closed.

• The firewall allows keepalive messages.

How Can I Prevent a Slow Operation From Delaying Other Operations?

When you use the same MongoClient instance to run multiple MongoDB operations concurrently, a slow operation can cause delays to other operations. Slow operations keep a connection to MongoDB occupied, which can cause other operations to wait until an additional connection becomes available.

If you suspect that slow MongoDB operations are causing delays, you can check the performance of all in-progress operations by using the following methods:

• Enable the database profiler on your deployment. To learn more, see Database Profiler in the Server manual.

• Run the db.currentOp() MongoDB Shell command. To learn more, see the db.currentOp() documentation in the Server manual.

• Enable connection pool monitoring. To learn more, see Connection Pool Monitoring.

After you determine which operations are causing delays, try to improve the performance of these operations. Read the Best Practices Guide for MongoDB Performance for possible solutions.

If you implement performance best practices but still experience delays, you can modify your connection settings to increase the size of the connection pool. A connection pool is the group of connections to the server that the driver maintains at any time.

To specify the maximum size of a connection pool, you can set the maxPoolSize option in the connection options for your MongoClient instance. The default value of maxPoolSize is 100. If the number of in-use connections to a server reaches maxPoolSize, the next operation sent to the server pauses until a connection to the driver becomes available. The following code sets maxPoolSize to 150 when creating a new MongoClient:

const client = new MongoClient(uri, { maxPoolSize: 150 });

How Can I Ensure my Connection String Is Valid for a Replica Set?

The connection string passed to the driver must use exact hostnames for the servers as set in the Replica Set Config. Given the following configuration settings for your Replica Set, in order for the Replica Set discovery and failover to work, the driver must have access to server1, server2, and server3.

{
  "_id": "testSet",
  "version": 1,
  "protocolVersion": 1,
  "members": [
    {
      "_id": 1,
      "host": "server1:31000"
    },
    {
      "_id": 2,
      "host": "server2:31001"
    },
    {
      "_id": 3,
      "host": "server3:31002"
    }
  ]
}

If you are unable to find the answer to your question here, try our forums and support channels listed in the Issues and Help section.